ADO ELECTRONICS LIMITED
ADO ELECTRONICS LIMITED LED Lighting Expert
Add to Cart
3 Watt LED Corn Light E27 SMD3014 Energy Saving 360 ° Beam Angle AC85-265V
1. Advantages:
A: Use Epistar led SMD3014/SMD2835 as the light source, the light lumen efficiency is more than 100LM/W, it is very bright.
B: The most important part is the LED driver, it is isolated IC constant current, very smart and stable, with the protection of over load/over voltage/short circuit
C: PBT flame resistant material, to eliminate the unnessary security risks
D: High transmittance glass lamp, high light efficiency, good color rendering
E: 360° light beam angle, no dark area
2. Specification:
3. Features:
1. Low power consumption, high power efficiency.
2. No UV or IR radiation, Conductive to eye protection.
3. Soft light, no flickering.
4. Easy to install with E27 base.
5. Width lighting angle of 360°.
6. High temp-resistant engineering fireproof materials adopted.
7. Great Energy Saving
8. Scientifically-designed heat dissipater with much better cooling effect
9. It's major to replace the CFL with screwed lamp base directly
4. Other Models Specification:
| Item No. | Wattage | LED Quantity | Material | Base | Size(D*L) |
| AD-2U | 3W | 16PCS | Glass+PBT | E27 / B22 / E14 | Φ34×104mm |
| AD-3U | 5W | 24PCS | Glass+PBT | E27 / B22 / E14 | Φ43×112mm |
| AD-3U | 7W | 36PCS | Glass+PBT | E27 / B22 / E14 | Φ40×134mm |
| AD-3U | 9W | 48PCS | Glass+PBT | E27 / B22 / E14 | Φ43×137mm |
| AD-3U | 12W | 60PCS | Glass+PBT | E27 / B22 / G24 | Φ51×170mm |
| AD-4U | 16W | 80PCS | Glass+PBT | E27 / B22 | Φ58×180mm |
| AD-4U | 20W | 100pcs | Glass+PBT | E27 / B22 / E40 | Φ63×186mm |
| AD-4U | 24W | 120pcs | Glass+PBT | E27 / B22 / E40 | Φ67×240mm |
| AD-4U | 30W | 160pcs | Glass+PBT | E27 / B22 / E40 | Φ71×255mm |
5. Application:
Suitable for hotel,villa,coffee bar,housing and indoor area lighting.it is the ideal lighting source for the replacement market of conventional halogen lamps and energy-saving lamp.
6. Quality control:
100% of the lamps will be tested and keep lighting for 24 hours to test its quality reliability , and we will also test it’s temperature after 24 hours lighting.Then after it is cool we again test 100% of the lamps to see if it still work well. If defective, we will check the reasons and make sure not to happen again.
